Specifications Table for RRLQ-CV3

RRLQ004CAV3 RRLQ006CAV3 RRLQ008CAV3 RRLQ011CAV3 RRLQ014CAV3 RRLQ016CAV3
Dimensions Unit Height mm 735 735 735 1,345 1,345 1,345
    Width mm 832 832 832 900 900 900
    Depth mm 307 307 307 320 320 320
Weight Unit kg 54 56 56 113 113 113
Fan Air flow rate Heating High m³/min 45 47 47      
    Cooling High m³/min 52.5 52.5 52.5      
Operation range Heating Min. °CWB -25 -25 -25 -25 -25 -25
    Max. °CWB 25 25 25 35 35 35
  Cooling Min. °CDB 10 10 10 10.0 10.0 10.0
    Max. °CDB 43 43 43 46.0 46.0 46.0
  Domestic hot water Min. °CDB -25 -25 -25 -20 -20 -20
    Max. °CDB 35 35 35 35 35 35
Sound power level Heating Nom. dBA 61 61 62 64 64 66
  Cooling Nom. dBA 63 63 63 64 66 69
Sound pressure level Heating Nom. dBA 48 (3) 48 (3) 49 (3) 51 51 52
  Cooling Nom. dBA 48 (3) 49 (3) 50 (3) 50 52 54
Refrigerant Type   R-410A R-410A R-410A R-410A R-410A R-410A
  GWP   2,087.5 2,087.5 2,087.5 2,087.5 2,087.5 2,087.5
  Charge TCO2Eq 3.0 3.3 3.3 7.1 7.1 7.1
  Charge kg 1.45 1.60 1.60 3.4 3.4 3.4
Piping connections Liquid OD mm 6.35 6.35 6.35 9.52 9.52 9.52
  Gas OD mm 15.9 15.9 15.9 15.9 15.9 15.9
  Drain OD mm 1x ø15 + 1x ø20 1x ø15 + 1x ø20 1x ø15 + 1x ø20 26 26 26
  Level difference IU - OU Max. m 20 20 20 30 30 30
  Heat insulation       Both liquid and gas pipes Both liquid and gas pipes Both liquid and gas pipes
Quantity Installation manual Installation manual Installation manual      
Power supply Name   V3 V3 V3 V3 V3 V3
  Phase   1~ 1~ 1~ 1~ 1~ 1~
  Frequency Hz 50 50 50 50 50 50
  Voltage V 230 230 230 230 230 230
Current Recommended fuses A 20 20 20 40 40 40
Notes Operation range heating (outdoor unit): range increase by support back-up heater Operation range heating (outdoor unit): range increase by support back-up heater Operation range heating (outdoor unit): range increase by support back-up heater The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information.
  Operation range domestic hot water (outdoor unit): range increase by support booster heater Operation range domestic hot water (outdoor unit): range increase by support booster heater Operation range domestic hot water (outdoor unit): range increase by support booster heater Condition: Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) Condition: Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C) Condition: Ta DB/WB 7°C/6°C - LWC 35°C (DT = 5°C)
  The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. Condition: Ta 35°C - LWE 7°C ( DT = 5°C) Condition: Ta 35°C - LWE 7°C ( DT = 5°C) Condition: Ta 35°C - LWE 7°C ( DT = 5°C)
  Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase Operation range domestic hot water (outdoor unit): range increase by support booster heater Operation range domestic hot water (outdoor unit): range increase by support booster heater Operation range domestic hot water (outdoor unit): range increase by support booster heater
  PED unit category: excluded from scope of PED due to article 1, item 3.6 of 97/23/EC PED unit category: excluded from scope of PED due to article 1, item 3.6 of 97/23/EC PED unit category: excluded from scope of PED due to article 1, item 3.6 of 97/23/EC Operation range heating (outdoor unit): range increase by support back-up heater Operation range heating (outdoor unit): range increase by support back-up heater Operation range heating (outdoor unit): range increase by support back-up heater
Standard Accessories Tie-wraps       2 2 2
  Installation manual       1 1 1
Notes       See separate drawing for operation range See separate drawing for operation range See separate drawing for operation range
        In accordance with EN/IEC 61000-3-11, respectively EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys ≤ Zmax, respectively Ssc ≥ minimum Ssc value. In accordance with EN/IEC 61000-3-11, respectively EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys ≤ Zmax, respectively Ssc ≥ minimum Ssc value. In accordance with EN/IEC 61000-3-11, respectively EN/IEC 61000-3-12, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys ≤ Zmax, respectively Ssc ≥ minimum Ssc value.
        Minimum Ssc (=Short-circuit power) value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase Minimum Ssc (=Short-circuit power) value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase Minimum Ssc (=Short-circuit power) value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase
        EN/IEC 61000-3-11: European/international technical standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated ≤ 75A EN/IEC 61000-3-11: European/international technical standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated ≤ 75A EN/IEC 61000-3-11: European/international technical standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated ≤ 75A
        Zsys: system impedance Zsys: system impedance Zsys: system impedance