| EBHQ006BBV3 | EBHQ008BBV3 | ||||
|---|---|---|---|---|---|
| Heating capacity | Nom. | kW | 6.00 (2), 5.58 (4) | 8.85 (2), 8.15 (4) | |
| Cooling capacity | Nom. | kW | 7.00 (1), 5.12 (3) | 8.37 (1), 6.08 (3) | |
| Power input | Cooling | Nom. | kW | 2.20 (1), 2.16 (3) | 2.97 (1), 2.75 (3) |
| Heating | Nom. | kW | 1.41 (2), 1.79 (4) | 2.21 (2), 2.72 (4) | |
| COP | 4.26 (2), 3.11 (4) | 4.00 (2), 3.00 (4) | |||
| EER | 3.18 (1), 2.37 (3) | 2.82 (1), 2.21 (3) | |||
| Dimensions | Unit | Height | Mm | 805 | 805 |
| Width | Mm | 1,190 | 1,190 | ||
| Depth | Mm | 360 | 360 | ||
| Weight | Unit | kg | 95 | 95 | |
| Operation weight | kg | 99 | 99 | ||
| Sound power level | Heating | Nom. | dBA | 61 | 62 |
| Cooling | Nom. | dBA | 63 | 63 | |
| Sound pressure level | Heating | Nom. | dBA | 48 (6) | 49 (6) |
| Cooling | Nom. | dBA | 48 (6) | 50 (6) | |
| Refrigerant | Type | R-410A | R-410A | ||
| GWP | 2,087.5 | 2,087.5 | |||
| Charge | kg | 1.7 | 1.7 | ||
| Charge | TCO2Eq | 3.5 | 3.5 | ||
| Compressor component | Main power supply | Name | V3 | V3 | |
| Phase | 1~ | 1~ | |||
| Frequency | Hz | 50 | 50 | ||
| Voltage | V | 230 | 230 | ||
| Notes | (1) - Tamb 35°C - LWE 18°C (DT=5°C) | (1) - Tamb 35°C - LWE 18°C (DT=5°C) | |||
| (2) - DB/WB 7°C/6°C - LWC 35°C (DT=5°C) | (2) - DB/WB 7°C/6°C - LWC 35°C (DT=5°C) | ||||
| (3) - Tamb 35°C - LWE 7°C (DT=5°C) | (3) - Tamb 35°C - LWE 7°C (DT=5°C) | ||||
| (4) - DB/WB 7°C/6°C - LWC 45°C (Dt=5°C) | (4) - DB/WB 7°C/6°C - LWC 45°C (Dt=5°C) | ||||
| (5) - Pump power input is included in heating and cooling power input | (5) - Pump power input is included in heating and cooling power input | ||||
| (6) - The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. | (6) - The sound pressure level is measured via a microphone at a certain distance from the unit. It is a relative value depending on the distance and acoustic environment. Refer to sound spectrum drawing for more information. | ||||
| (7) - 15°C-25°C: BUH only, no heat pump operation = during commissioning | (7) - 15°C-25°C: BUH only, no heat pump operation = during commissioning | ||||
| (8) - Including piping + PHE; excluding expansion vessel | (8) - Including piping + PHE; excluding expansion vessel | ||||
| (9) - Excluding water volume in the unit. In most applications this minimum water volume will have a satisfying result. In critical processes or in rooms with a high heat load though, extra water volume might be required. Refer to operation range for more info. | (9) - Excluding water volume in the unit. In most applications this minimum water volume will have a satisfying result. In critical processes or in rooms with a high heat load though, extra water volume might be required. Refer to operation range for more info. | ||||
| (10) - The 3-way valve should be mounted as close as possible to the outdoor unit | (10) - The 3-way valve should be mounted as close as possible to the outdoor unit | ||||
| (11) - Power supply compressor compartment is for compressor, fan, pump and controller | (11) - Power supply compressor compartment is for compressor, fan, pump and controller | ||||
| (12) - Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | (12) - Minimum Ssc value: Equipment complying with EN/IEC 61000-3-12: European/International Technical Standard setting the limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16A and ≤ 75A per phase | ||||
| (13) - In accordance with EN/IEC 61000-3-11, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys (system impedance) ≤ Zmax | (13) - In accordance with EN/IEC 61000-3-11, it may be necessary to consult the distribution network operator to ensure that the equipment is connected only to a supply with Zsys (system impedance) ≤ Zmax | ||||
| (14) - EN/IEC 61000-3-11: European/international technical standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated ≤ 75A | (14) - EN/IEC 61000-3-11: European/international technical standard setting the limits for voltage changes, voltage fluctuations and flicker in public low-voltage supply systems for equipment with rated ≤ 75A | ||||
| (15) - Wiring connections: cf. connection diagram for full wiring overview; Select diameter and type according to local regulations; For more details on voltage range and current cf. EBHQ installation manual | (15) - Wiring connections: cf. connection diagram for full wiring overview; Select diameter and type according to local regulations; For more details on voltage range and current cf. EBHQ installation manual | ||||
| (16) - See separate drawing for operation range | (16) - See separate drawing for operation range | ||||
| (17) - Contains fluorinated greenhouse gases | (17) - Contains fluorinated greenhouse gases | ||||
| (17) - PED: assembly = category l : excluded from scope of PED due to article 1, item 3.6 of 97/23/EC | (17) - PED: assembly = category l : excluded from scope of PED due to article 1, item 3.6 of 97/23/EC | ||||