FDA-A / RZA-D | Daikin

Product Features

Compact (870mm high) and lightweight single fan design makes the unit unobtrusive, saves space and is easy to install
High external static pressure up to 250Pa facilitates extensive duct and grille network
Combining with R-32 Bluevolution technology, reduces environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has up to lower 16% refrigerant charge
Choosing for an R-32 product, reduces the environmental impact with 68% compared to R-410A, leads directly to lower energy consumption thanks to its high energy efficiency and has a lower refrigerant charge
Possibility to change ESP via wired remote control allows optimisation of the supply air volume
Discretely concealed in the ceiling: only the suction and discharge grilles are visible
Guarantees operation in heating mode down to -20°C
Up to 26.4kW in heating mode
Market-leading serviceability and handling, thanks to wide access area, 7-segment display and additional handle
Unified indoor unit range for R-32 and R-410A
Replace existing systems with R-32 technology without needing to replace the piping
Built-in drain pump (625mm) increases the flexibility and installation speed (standard for FDA125, optional for FDA200-250)
Refrigerant cooled PCB guarantees reliable cooling, as it is not influenced by ambient temperature.
Standard supplied suction filter simplifies installation
Maximum piping length up to 100m
Maximum installation height difference up to 30m
Outdoor units for pair, twin, triple, double twin application

Benefits

Home leave operation

Maintains the indoor temperature at your specified comfort level during absence, thus saving energy
Auto cooling-heating changeover

Automatically selects heating or cooling mode to achieve the set temperature.
Inverter

Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.
Fan only

The unit can be used as fan, blowing air without heating or cooling.
Fan speed steps (3 steps)

Allows to select up to the given number of fan speed.
Dry programme

Allows humidity levels to be reduced without variations in room temperature.

Air filter

Removes airborne dust particles to ensure a steady supply of clean air.
Weekly timer

Can be set to start heating or cooling anytime on a daily or weekly basis.
Wired remote control

Starts, stops and regulates the air conditioner.
Centralised control

Starts, stops and regulates several air conditioners from one central point.
Online controller via app

Control your indoor unit from any location via app
Auto-restart (standard)

The unit restarts automatically at the original settings after power failure.
Self diagnosis

Simplifies maintenance by indicating system faults or operating anomalies.
Drain pump kit (standard)

Facilitates condensation draining from the indoor unit.
Twin/triple/double twin application

2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control.