Pair, Twin, Triple, double twin

Seasonal Smart - FUQ-C / RZQG-L9V1

Product Features

Even rooms with ceilings up to 3.5m can be heated up or cooled down very easily without capacity loss
Top efficiency: - energy labels up to A++ in both cooling and heating - compressor that offers substantial efficiency improvements - control logic that optimises efficiency at the most frequently encountered operating conditions and that optimises
Individual flap control: flexibility to suit every room layout without changing the location of the unit!
The perfect balance in efficiency and comfort thanks to Variable Refrigerant Temperature: top seasonal efficiency throughout most of the year and quick reaction speed on the hottest days.
Suits high sensible, infrastructure cooling applications
5 different discharge angles between 0 and 60°can be programmed via the remote control
Replace existing systems with R-32 technology without needing to replace the piping
Extended operation range down to -20°C in heating and down to -15°C in cooling
Stylish unit blends easily with any interior. The flaps close entirely when the unit is not operating and there are no air intake grilles visible
Optimum comfort guaranteed with automatic air flow adjustment to the required load
With a gas cooled PCB reliable cooling is guaranteed as it is not influenced by ambient temperature
Maximum piping length up to 75m, minimum piping length is 5m.
Standard drain pump with 720mm lift increases flexibility and installation speed
No optional adapter needed for DIII-connection, link your unit into the wider building management system.
Outdoor units for pair, twin, triple, double twin application
Daikin outdoor units are neat, sturdy and can easily be mounted on a roof or terrace or simply placed against an outside wall
Units optimized for seasonal efficiency give an indication on how efficient an air conditioner operates over an entire heating or cooling season.

Benefits

Home leave operation

Maintains the indoor temperature at your specified comfort level during absence, thus saving energy
Draught prevention

When starting to warm up or when the thermostat is off, the air discharge direction is set horizontally and the fan to low speed, to prevent draught. After warming up, air discharge and fan speed are set as desired.
Individual flap control

Individual flap control via the wired remote controller enables you to easily fix the position of each flap individually, to suit any new room configuration. Optional closure kits are available as well.
Vertical auto swing

Possibility to select automatic vertical moving of the air discharge flaps for efficient air and temperature distribution throughout the room.
Inverter

Inverter compressors continuously adjust compressor speed to actual demand. Fewer power-consuming starts and stops result in decreased energy consumption (up to 30%) and more stable temperatures.
Fan only

The unit can be used as fan, blowing air without heating or cooling.
Auto cooling-heating changeover

Automatically selects heating or cooling mode to achieve the set temperature.
Fan speed steps (3 steps)

Allows to select up to the given number of fan speed.
Dry programme

Allows humidity levels to be reduced without variations in room temperature.
Air filter

Removes airborne dust particles to ensure a steady supply of clean air.
Weekly timer

Can be set to start heating or cooling anytime on a daily or weekly basis.
Infrared remote control

Starts, stops and regulates the air conditioner from a distance.
Wired remote control

Starts, stops and regulates the air conditioner.
Centralised control

Starts, stops and regulates several air conditioners from one central point.
Auto-restart

The unit restarts automatically at the original settings after power failure.
Drain pump kit (standard)

Facilitates condensation draining from the indoor unit.
Infrastructure cooling

Remove in a reliable, efficient and flexible way the heat constantly generated by the IT and server equipment to ensure maximum uptime while offering the best return on investment.
Self diagnosis

Simplifies maintenance by indicating system faults or operating anomalies.
Twin/triple/double twin application

2,3 or 4 indoor units can be connected to only a single outdoor unit even if they have different capacities. All indoor units operate within the same heating or cooling mode from one remote control.